Mercury Labs

Equipment         1. Raspberry Pi         2. WiFi connection Step 1 Open a terminal window from Raspberry Pi. Step 2 Type following command in terminal. sudo apt-get install python3 Step 3 Type following command in terminal. sudo apt-get install idle3 Contact as Ridma Pramuditha Linkedln      -      www.linkedin.com/in/ridmapramuditha/ Email           -      pramuditharidma16@gmail.com                                        mercurylabs2019@gmail.com Design       -    Sanuja Ariyapperuma                               www.linkedin.com/in/sanujaariyapperuma/

Equipment        1. Raspberry pi         2. Micro USB cable        3. SD card        4. Card reader or SD Adapter        5. Monitor        6. HDMI cable        7. Mouse and Keyboard Step 1 Download Raspbian OS.          The latest version of Raspbian on the Raspberry Pi website here Step 2 You need to install two softwares for that.          1.  SD Memory Card Formatter (Website here).          2.  Win32 Disk Imager (Website here) Step 3 Insert the SD card into your computer. Step 4 Format the SD card. Step 5 Open Win32 Disk Imager. Browse and select the downloaded Raspbian OS image file. Select the correct device your SD card. Click on the "Write" button. Step 6 Write is complete. Eject the SD Card. Step 7 Insert it into the Raspberry Pi. Turn it on Raspberry Pi. Contact as Ridma Pramuditha LinkedIn    -      www.linkedin.com/in/ridmapramuditha/ Email         -     pramuditharidma16@gmail.com                                       mercurylabs2019@gmail.com Design         -  

NodeMCU firmware in ESP Modules. NodeMCU flasher is a firmware programmer for NodeMCU DEVKIT. It will be cross platform and open source. Equipment         1. NodeMCU         2. Micro USB cable Step 1 Download this link. https://drive.google.com/drive/folders/1S_PLKzsrV63LZTRAMsS5HdAWQ54MiNvV?usp=sharing Step 2 Open the NodeMCU flasher master folder than open the win32/win64 folder as your computer. Now open the folder Release than double click ESP8266Flasher. Step 3 Select the COM Port.  Step 4 Go to config tab. Click on the small gear and open up the firmware. Step 5 Go to the advanced tab. Step 6 Go to the Operation tab. Click on Flash Button. Contact as Pramuditha Ridma Linkedln -  www.linkedin.com/in/ ridmapramuditha Email      - pramuditharidma16@gmail.com                   mercurylabs2019@gmail.com